Travel lanes
Carts, tuggers and steel wheels run the same paths all day. Thin coatings wear through there first.
Manufacturing & metal fab · Texas Plant floors built for impact.
Dropped parts, carts, steel wheels and cutting fluids. Thin coatings chip in the travel lanes first, so we build thickness where the floor takes the hits.
Where it fails
Plant floors fail where the work happens.
We walk the floor with the people who run it, because the failure points follow the process.
Drop zones
Dropped parts and tools chip thin films. About 1/8" of quartz or slurry takes the hit instead.
Weld and grind areas
Sparks and hot slag mark any floor. A thick quartz system hides and resists it far better than a thin coat.
Coolants and chemicals
Cutting fluids, coolants and solvents break down the wrong coating. Send us the chemical list and we match the system.
The system
Thickness where it’s needed. Not everywhere.
A plant floor rarely needs one system wall to wall. We put the heavy build in the lanes and impact zones and keep the rest efficient.
- Travel lanes
- System 03 · Heavy-duty, about 1/8"
- Assembly and QA
- System 02 · Standard, 15–20 mils
- Chemical areas
- System 04 · Novolac for chemical storage and battery rooms
- Line items
- Joint filling, crack repair, safety striping and marked work zones
- Timing
- Planned shutdowns, weekends, or one zone at a time
How it runs
Planned around production.
Downtime costs more than the floor. The schedule is part of the bid, not an afterthought.
-
Walkthrough + moisture test
We map traffic, wheel types, drop zones and chemical areas with your team, and moisture-test the slab.
-
Zone plan
We sequence the floor around production: shutdown weeks, weekends, or one zone at a time.
-
Shot-blast or grind
Shot-blasting or diamond grinding to CSP 2–3 with HEPA dust collection, under OSHA’s silica rule.
-
Build, logged
Slurry or quartz broadcast in the lanes, standard system elsewhere, then striping. Every stage logged.
-
Walkthrough + record
We walk each zone with you and hand over the install log, photos and return-to-service times.
Photo record
Real jobs only.
These frames fill with photos from our own Texas jobs as they finish. No stock photos.
Job photo
Job photo
Job photo
FAQ
Plant questions.
Something else? Call (000) 000-0000.
Manufacturing
Do we need 1/8" or will a thin coat do?
It depends on what hits the floor. Lanes with steel wheels and drop zones need the heavy build. Assembly and packing areas usually don’t. We’ll mark it zone by zone at the walkthrough.
Can you work around production?
Yes. We install during shutdowns, on weekends, or one zone at a time, and the schedule goes in the bid.
Will it hold up to our chemicals?
Send us your chemical list or safety data sheets. We match the system to them, and use novolac where stronger chemicals are stored.
Can you mark safety zones and walkways?
Yes. Walkways, forklift lanes, work cells and keep-clear zones go on the bid as their own line.